Rove Origin: Custom Titanium Manual Wheelchair
←All Models
Origin
The OG closed frame wheelchair. Maximum rigidity for the highly active user who demands the most efficient push.
Enquire NowFrame Type
Closed Frame
Frame Weight
1.9 – 2.5 kg
Transport Weight
3.9 – 6.5 kg
CoG Adjustment
Flip Chip · 30 mm
Max User Weight
110 kg
Certification
AS/NZS 3695.1:2011
About the Origin
The Origin is Rove's closed frame flagship — the stiffest, most efficient wheelchair in the range. Every watt of push energy transfers directly into motion, with zero flex wasted through the frame. Built for highly active full-time wheelchair users who demand peak performance.
The closed frame design creates a continuous structural loop from axle to axle, delivering exceptional torsional stiffness. Paired with Rove's in-house carbon fibre components and titanium 3D-printed lugs, the result is a frame that rivals the best in the world — built right here in Australia.
Thanks to its rigid closed frame construction, the Origin is also our recommended model for heavier users who need maximum structural support without compromising performance.
Rated to 110 kg under Australian standards (AS/NZS 3695.1:2011). If you’re up to 140 kg, get in touch with us to discuss your options.
Technical Data Sheet
Origin — Full specification & materials reference for clinicians and retail partners
01 FRAME STRUCTURE & MATERIALS
| Component | Material | Manufacturing / Origin | Detail |
|---|---|---|---|
| Frame Tubes | Carbon Fibre | In-house layup | Filament-wound carbon fibre tubes cured in-house. Main frame tubes: 30 mm OD × 0.9 mm wall. Grab bar: 25 mm OD × 0.9 mm wall. |
| Frame Type | Carbon Fibre Titanium | In-house | Closed frame continuous structural loop from rear axle to front caster posts. Maximum torsional stiffness. |
| Frame Joints & Lugs | Titanium | 3D printed in-house | Ti6Al4V aerospace-grade titanium. 1.3 mm wall. Complex load-bearing geometries via in-house metal 3D printing. Internal lattice structures in low-stress zones minimise mass. |
| Backrest Frame | Titanium Carbon Fibre | In-house | Rigid, folding (w/cking), folding (angle adjustable), or telescopic/adjustable backrest post options. |
| Side Guards | Carbon Fibre | In-house layup | Flat carbon fibre panels lightweight protection. Carbon straight or fendered profile. Fixed or removable. |
| Footplates | Carbon Fibre | In-house layup | Rigid angle-adjustable carbon footplates. Width: XS 240 mm to XL 320 mm. Standard angle 7°. |
| Axle Position System | Titanium | In-house | Fixed axle or Flip Chip. Flip Chip provides 30 mm horizontal CoG adjustment in 10 mm increments. Additional flip chip sets available for extended range. |
02 WHEELS & ROLLING COMPONENTS
| Component | Brand / Options | Availability | Detail |
|---|---|---|---|
| Rear Wheels Standard | Range Wheels Spinergy | Standard | Range Wheels (coming soon) or Spinergy specify brand and size at order. Available 22" (501), 24" (540), 25" (559), 26" (590). |
| Rear Wheels Spinergy Options | Spinergy | Option | LX (12 spoke), CLX (18 spoke), Blade LXL (18 spoke), SLX (24 spoke), SLX Offroad, 507 Off-Road Rim, Special Order / Custom Wheel. |
| Off-Road Wheel Package Spinergy | Spinergy | Option | Spinergy SLX 507 Wheel, alloy pushrim, Schwalbe off-road tyres, longer stainless steel axles. |
| Off-Road Wheel Package Standard | Aluminium | Option | Aluminium off-road rim, alloy pushrim, Schwalbe off-road tyres, longer stainless steel axles. |
| Axle | Stainless Steel Titanium | Standard | Standard stainless steel axle included. Titanium axle and quad-release stainless steel axle available as options. |
| Caster Wheels | Rove Branded | Standard | Rove branded casters imported. Available in 3" × 1.4", 4" × 1.4", 5" × 1.4" (Origin/Axis) or 3", 4" sizes (Titan). Aluminium hub; black or silver. |
| Pushrims | Omobic Carbo Life Natural Fit Alloy Titanium Stainless Steel | Option | Alloy / Titanium / Stainless Steel / Stainless TC / Stainless TC Maxx Natural Fit: Original, LT, Surge, Surge LT, Q-Grip, Standard Thumbguard, Super Thumbguard Carbo Life: Gekko, Gekko S, Curve, Curve Tetra, Curve L, Curve L Tetra Omobic: Simi, Nova, Optimum, Optimum Z, Optimum F, Optimum ZF |
03 TYRES
| Type | Options | Availability | Detail |
|---|---|---|---|
| Road Tyres | Schwalbe Primo | Standard | Schwalbe One, Schwalbe RightRun, Primo Solid PU, Schwalbe Marathon Plus (1", 1.10", 1 3/8"). Custom tyre available on request. |
| Off-Road Tyres | Schwalbe | Option | Schwalbe Billy Bonkers, Smart Sam, Hans Dampf. |
04 BRAKES, SIDE GUARDS & FOOTRESTS
| Component | Options | Availability | Detail |
|---|---|---|---|
| Brakes | Rove Scissor Lock | Standard | Rove Scissor Lock standard. Push locks, pull locks, and axle locks available as options specify LH / RH / both. |
| Side Guards Carbon | Carbon Fibre | Standard | Carbon straight or carbon fendered profile fixed or removable. No rubber edging or rubber edging options. Profile: offset or in-line with tyre. |
| Side Guards Fabric | Fabric | Option | Heavy duty fabric side guards fixed or removable. |
| Arm Rests | Carbon Fibre | Option | Integrated into the side guard no separate fitment required. |
| Footrest Angle Adjustable | Carbon Fibre | Standard | Angle-adjustable carbon plate footrest. Standard angle 7°; customisable. |
| Footrest Winged Carbon | Carbon Fibre | Option | Winged carbon plate for enhanced foot containment. |
| Footrest Open Loop | Titanium | Option | Open-loop titanium footrest minimal and ultralight. |
| Footrest Flip Back | Various | Option | Flip-back plate for easier transfers. |
| Footplate Width | XS–XL + Custom | Standard | XS 240 mm, S 260 mm, M 280 mm, L 300 mm, XL 320 mm. Custom width available. |
05 SEATING & UPHOLSTERY
| Component | Material / Options | Availability | Detail |
|---|---|---|---|
| Seat Base Mesh | Air Mesh | Standard | Lightweight mesh seat sling fixed or wrap-around configuration. Breathable and lightweight. |
| Seat Base Solid Fabric | Fabric | Option | Solid fabric seat sling fixed or wrap-around. Higher durability. |
| Seat Base Rigid Carbon | Carbon Fibre | Option | Rigid carbon seat base for firm, consistent support surface. Compatible with medical cushions. |
| Backrest Upholstery Mesh | Air Mesh | Standard | Tension-adjustable lightweight mesh backrest. Velcro and metal tri-glide tension system. Toolless adjustment. |
| Backrest Upholstery Heavy Duty | Fabric | Option | Tension-adjustable heavy duty fabric backrest. Higher durability for demanding use. |
| Rigid Backrest (3rd Party) | Various | Option | Compatible with: Dreamline Carbon Ignite, ADI Matrx MX2, NXT, Varalite. Specify width, height, clamp details at order. |
| Medical Backrest | Varies by brand | Compatible | Compatible with standard medical backrests confirm fitment at order. |
| Cushion Foam | Foam | Option | 1", 2", or 3" foam cushion available. |
| Medical Cushion | Varies by brand | Compatible | Compatible with all standard medical seat cushions specify model, width and depth at order. |
| Pocket / Storage | Fabric | Option | Sling phone pocket or full pouch pocket available as additions to the seat or backrest. |
| Backrest Zipper Pouch | Fabric | Option | Zippered storage pouch mounted to rear of backrest upholstery. |
| Upholstery Construction | Webbing · Velcro · Metal Tri-glides · Thread | Standard | All upholstery sewn in-house using tension webbing, metal tri-glide buckles, Velcro tabs, and high-strength thread. |
06 ACCESSORIES
| Item | Detail | Availability |
|---|---|---|
| Hanger Protectors | Protects the frame at key hang points during transport. | Option |
| Underchair Bag Standard | Available in Black, Olive, Kawaii. | Option |
| Underchair Bag Premium | Premium fabric construction, larger capacity. | Option |
| Underchair Net | Lightweight open mesh for underneath storage. | Option |
| Carbon Bottle Holder | Carbon fibre bottle holder lightweight, secure mount. | Option |
| Electric Air Pump | Compact electric pump for tyre inflation on the go. | Option |
| Carbon Load Carrier | Carbon fibre load carrier for under-seat storage. | Option |
| Additional Flip Chip Set | Extra set of flip chip axle plates for extended CoG adjustment range. +40 mm adjustment. | Option |
07 FINISH OPTIONS
| Component | Options | Detail |
|---|---|---|
| Titanium Lug Finish | Brushed · Polished | Default brushed finish. Polished available as upgrade. |
| Lug Ceramic Coating | Black · Gold · Rose Gold · Custom Colour | Ceramic coating applied over brushed or polished lugs. Custom colour available specify RAL/Pantone. |
| Carbon Tube Colour | Clear · Colour Tinted · Solid Colour | Clear coat shows raw carbon weave. Tinted or solid colour available specify colour. |
| Carbon Tube Finish | Matt · Gloss | Matt or gloss clear/colour coat over carbon tubes. |
| Logo Colour | Ceramic · Metallic · White · Custom | Rove logo colour specify at order. |
08 KEY SPECIFICATIONS
Max User Weight110 kg
Frame Weight1.8 – 2.5 kg
Frame TypeClosed Frame
Seat & GeometryCustom every chair is measured and built to the individual
Rear Wheel Sizes22 – 26"
Caster Sizes3 – 6"
Rear Wheel Camber0 – 5°
Axle PositionFixed or Flip Chip30 mm range · 10 mm steps
Rear Wheel Offset25 mm (standard)
Manufactured InAustralia
CertificationAS/NZS 3695.1:2011
For clinicians & retailers: All Rove wheelchairs are built to order and fully customised to the individual user. Contact your Rove representative or reach out directly for a full specification quote.